Compex Systems DVR4-80 Manual do Utilizador descarregar pdf (Página 34)

EVERFOCUS ELECTRONICS CORPORATION

¾ Call Monitor: This field is to set the sequence for the call monitor output.

 Dwell Time: This field represents the rate at which the cameras will

sequence on the call monitor. The dwell time for the auto sequence

can be set from 0 to 99 seconds. To change this, simply use the arrow

keys on the DVR which also represent the channel 1-4 keys (These are

the top four buttons). Use the up and down arrow keys to make your

selection.

 Operation: This field is to select from camera 1 to 4 for the sequence

screen. The default is set to CH1. To change this, simply use the arrow

keys on the DVR which also represent the channel 1-4 keys (These are

the top four buttons). Use the up and down arrow keys to make your

selection.

o Please Note: If an alarm occurs call monitor will display that

particular camera automatically.

: Press or to move the cursor to the left or right.

: Press or to change the value.

These keys are located at the top left row of keys (same keys

as channel 1-4).

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 104 105

Sem comentários

Compex Systems DVR4-80 Manual do Utilizador Página 34